Nowadays copper fittings are widely used in different fields,such as automobile,building,electrical equipment,household appliances,toys and so on. Ningbo YongXiang Copper Pipeline Co.,Ltd specializes in manufacturing copper fittings,bronze valves and other copper pipe.The copper fitting is known of its professional workmanship and high quality.
A fitting cutter makes cutting copper fittings easy.Simply hand tighten the fitting cutter onto the mark where you want to cut the fitting.Rotate the cutter around the fitting a couple of times to create a groove all around the fitting,and then each time you rotate the cutter,tighten the blade a little.Each rotation will cut a little deeper into the fitting and the cut will be straight.Don't tighten too much or you can bend the fitting out of round.After cutting the fitting,remove any burrs inside the fitting with the burr removal tool built into regular fitting cutters.You want to remove all the burrs,because they will cause water passing through the fitting to swirl and make noise if you leave them there.
There are three basic ways to join copper fittings to each other.Hard copper can be sweat soldered or joined using a compression coupler,while soft copper can be joined using compression couplers or a flare joint.
|
